Heavy-Duty White Poly Tarps — 8 mil, 12 × 12 Weave

Material overview

Heavy-Duty White Poly Tarps — 8 mil, 12 × 12 Weave is offered by New York Tarp & Company as Woven and coated polyethylene, 12 × 12 cross weave, White. The listed size or width is 18 stocked cut sizes from 6 × 8 to 40 × 60 ft. Heavy-duty general cover with more body and closer tie points than regular-spec poly tarps.

Recommended applications

Truck and trailer covers, agriculture, construction, equipment storage, barriers, shelters, and canopies.

Performance and selection notes

Outdoor performance depends on the base fabric, coating or laminate, UV package, reinforcement, seams, and fabrication.

Confirm whether dimensions are cut size or finished size, then check material, coating, weight, reinforcement, seams, pocket or drain layout, grommet spacing, tie points, UV exposure, and the attachment system.

Specifications for this listing

Material

Woven and coated polyethylene

Construction

12 × 12 cross weave

Weight / denier / gauge

8 mil; 4.0 oz/yd² / 137 gsm

Width / sizes

18 stocked cut sizes from 6 × 8 to 40 × 60 ft

Finish / coating

Waterproof coated surface and UV-resistant treatment

Colors / variants

White

Edge / hardware

Heat-sealed PE-rope hem; rust-proof aluminum grommets at corners and every 1.5 ft; solid plastic corner bars

Key performance

Heavy-duty general cover with more body and closer tie points than regular-spec poly tarps

Care / use

Use on a compatible frame, pitch for drainage and remove or re-tension before severe wind

Safety / compliance

Listed dimensions are cut sizes; finished dimensions are smaller after hemming and welding

Continuous cut

Not applicable

Sales unit

Sold as the finished piece or selected size shown on the product page.

Order format

Choose the required option on the product page; the displayed price, availability, and add-to-cart selection follow that option.

For deadline-sensitive, color-critical, continuous-cut, custom-size, or specification-sensitive work, confirm the exact material, option, cut length, and current availability with NY Tarp before ordering.

Fabrication, care, and limitations

Install with drainage and load paths in mind, prevent water pooling, avoid sharp contact points, and distribute tension across suitable tie points. Inspect fabric, seams, pockets, hems, and hardware before each demanding use.

Specification check: Use the dimensions, construction, finish, color, and sales unit shown for this exact listing and selected option. Similar materials can differ by lot or supplier.

Need help with a finished project?

Share the intended use, dimensions, preferred material, quantity, timing, and a photo or sketch when useful. NY Tarp can help review material choice and custom-work requirements before fabrication.